Technical Support: Troubleshooting
Your Alarm System (Ademco LynxR-En)

1. How do I Determine the Status of My System?
   Press the "*" twice; the system will inform you of its status.
2. How do I Adjust the clock?
   Enter your 4 digit User Code + "Function" + "63"
   Enter the 2 digit hour + "Add"*
   Enter "1" for PM or "0" for AM + "Add"*
   Enter the 2 digit minute + "Add"*
   Enter the 2 digit month + "Add"*
   Enter the 2 digit day + "Add"*
   Enter the 2 digit year + "Add"*
3. How do I turn off the "low battery" beep?
   Enter your four digit User Code and "Off"
4. How do I turn on/off the chime feature?
   Press "#" and "9"
5. How do I bypass a zone to arm the system?
   Enter your four digit user code and the 2 digit zone number. For example, if the User Code was "1234," then "1234" + "01" would bypass zone #1. The keypad will beep once and "BYPASS" and the bypassed zone number will appear on the Keypad. Note: A fire zone cannot be bypassed.

* Note: For those models without an "Add" key, us the "*" key.

If you find that after reviewing the above Technical Support information you still have a question, please do not hesitate to contact us via telephone or email. We will respond to inquiry promptly.